EI-GNQ Natural Gas Burner for Asphalt Mixing Plant

EBICO EI-GNQ natural gas burner for asphalt mixing plant is designed and developed for the equipment of asphalt mixing plant. While adhering to the four major concepts of European products, which focus on safety, environmental protection, energy-saving, and intelligence, this burner has passed a lot of experiments for different environments and fuels in different markets, and EBICO has gained many qualified data of this type of burner. An advanced intelligent electronic proportional adjustment model is put into the market.

 

EBICO’s R & D team is always active on the front-line site of customers. EBICO will continuously transform and upgrade the burner according to customers’ feedback and actual machine working conditions. EBICO burner can handle a variety of fuels including ng, LNG, LPG, CNG, heavy & light oil, and coal fines, and through new ultra-low nitrogen Vic technology, EBICO has realized that NOx can be controlled within 30mg without the help of FGR, which is cutting-edge technology in the world.

Brand Overview

Founded in 1998, EBICO (China) environment Co., Ltd. is headquartered in Milan, Italy. With more than 20 years of industry experience, EBICO has been committed to building the most influential and professional burner manufacturing company in the world.

EBICO is very professional in providing supporting burners for steam boiler, hot water boiler, heat conduction oil future, garbage incinerator, hot air boiler, asphalt mixing plant, road structure and other equipment. EBICO has customers all over the world and countless successful cases. At the same time, EBICO has also actively participated in many international bidding projects, It has won high praise from customers.

Design and inspection standards for EBICO burners

Design Criteria: Follow

Test standard: follow

EU EN267 (fuel)

EU EN676 (gas)

EU CE/ISO certification

China CSEI certification

Russia EAC certification

National standard GB/T36699-2018

Product Characteristics

– EI-GNQ special axial-flow type burner for asphalt mixing plant is an H-shaped burner based on the axial flow fan. Abstract simulation frequency and pressure dual-control technology are applied to this series to widen the adjustable range.

– Its axial bellow and turbine mixer design enhance flame strength and improve combustion efficiency largely.

– The silencer is designed integrally. It reduces noise and applies aesthetic application technology.

– The burner is connected by a straight section cylindrical mode. Its pallet is movable and the structure is simple, so it is easy to move and maintain and the failure rate is low.

– Fuel and oxygen are computed and supplied by independent digit, and the ratio is computed respectively by PLC, so its efficiency and reliability are much higher.

– The fuel oil is supplied at low oil pressure and low air atomizing pressure, and poor oil is also applicable; the fuel gas is applied by gas ring atomizing, so it improves efficiency and reduces emission.

– Applicable fuel: gas, light oil, oil mixture, heavy/residual oil, oil/gas multipurpose, etc.

– This series of burners is applicable for model 500-5000 asphalt mixing plant. It is an ideal product for the asphalt mixing plant.

Model parameters

Model Output capacity

(KW)

Gas Consumption

(Nm3/h)

Oil Consumption

(kg/h)

Specifications of Heat

Conducting Oil Furnace

EI300GNQ 3750 325 300 500
EI600GNQ 7000 750 650 1000
EI1200GNQ 13500 1390 1200 2000
EI1800GNQ 21000 2200 1900 3000
EI2500GNQ 27000 2780 2400 4000
EI3000GNQ 31000 3250 2800 5000

Shipping method

Road
Transport

Maritime
Transport

Railway
Transport

Air
Transport

Service Standard and Guarantee

Model Selection

When you are not sure exactly what kind of burner your device needs: You can leave a message online or call for consultation. Our professional receptionist will give you an answer as soon as possible.

Total Solutions

According to customer requirements for fuel, applicable equipment, emission requirements, power range, flame length and so on. Our professional technical team will design the most suitable solution for you according to the actual situation.

Original Accessories

EBICO will provide all the spare parts needed for the burner and related equipment during operation. And can ensure that all choose high-quality brand products, perfect fit, no additional problems. You can purchase or consult directly online.

After-sales Service

EBICO offers a one-year warranty on all products you purchase. And will provide on-site debugging and remote technical services when conditions permit. In case of your need, EBICO can send after-sale specialist for on-site service.

Global Business Support

EBICO's success spans the globe. We look forward to working with you to explore new markets. Detailed information can be viewed through the case.

Online Technical Services

Considering time and space, EBICO can be guided remotely online. When EBICO receives your question, it will immediately arrange technicians to provide professional technical guidance via remote video. Solve problems quickly for all EBICO customers.

EBICO After-sales Service Commitment

Free maintenance within 12 months
24-hour online customer service
365 day non-stop service

Product data download