Inspection Before Starting the Fuel Oil Burner
Inspection Before Starting the Fuel Oil Burner
What inspections should be done before starting the fuel oil burner? Next, we will give you the answer from the editor of the EBICO burner.
The atomization form and basic operating principle of the fuel oil burner. If alcohol oil is selected as the fuel, the alcohol oil burning machine can select the mechanical atomization burner and material atomization burner according to the viscosity of the fuel oil. When the fuel is burned in the furnace of the radiation chamber of the combustor, high-heat gas will be generated and used as a carrier to flow into the convection chamber and be discharged from the chimney.
The crude oil to be heated first enters the furnace tube of the convection chamber of the burner. The furnace tube obtains heat energy from the gas passing through the convection chamber in the form of convection. This heat energy is transferred from the outer surface of the furnace tube to the inner surface of the furnace tube in the form of heat transfer, and in addition, it is transferred to the crude oil flowing in the tube in the form of convection.
There are several problems that may be encountered during the operation of the burner, but proper adjustments should be made to return to the normal operation of the machine.
Check whether the diesel is in place, whether the fuel pipeline is clean and smooth, whether the valve has been opened, whether there is pipeline leakage, and whether the pipeline installation is effective. Whether the oil inlet and return pipelines are properly assembled, and whether the valves are not allowed to be assembled on the oil return pipelines.