What Should Be Paid Attention To When Using Fuel Oil Burner?
What Should Be Paid Attention To When Using Fuel Oil Burner?
The fuel oil burner is installed on the furnace. During combustion commissioning, if there is black smoke, gradually open the large damper; If there is white smoke (water vapor), gradually close the small damper; If the damper is small enough to be smokeless, the burner burns normally. Then, turn off the power supply for a few minutes and turn it off, stop it for a few minutes and turn it on again to investigate whether the combustion and combustion are normal. If there is no abnormal phenomenon after repeated several times, it indicates that the fuel burner has been adjusted.
During the commissioning operation, the gas must be careful, safe, and efficient. After starting the burner, if the alarm is on, press the reset button again to restart at least 20 seconds after the demand ratio. If the flame length is very short and the color is red, close the conditioning flap at this time until the flame is slightly yellow and dazzling, its point fire is strong and powerful, and the flame length is moderate.
If the flame is red, its ignition intensity is poor and the combustion speed is low, then the air conditioning valve will continue to open. Matters need attention until the flame is slightly yellow, weak, and dazzling, its point fire is strong, and the shooting speed is moderate. Before starting the burner, please slightly open the air valve of the air conditioner under the fuselage (the opening is 1/3 of the full opening), and then open it. The firepower of the flame and the speed of flame eruption.
When the fuel oil burners fail one by one in the secondary combustion process, the fuel oil burners should be turned off to check whether the air supply system of the European insurance burners is normal and whether the circuit connection is correct. Fuel burners can be used to avoid problems before restarting combustion. Machine. It is prohibited to strike or collide with a wrench or metal bar in the air supply pipeline to prevent gas explosions caused by static electricity or sparks.