12
2024-Jan

Characteristics of gaseous fuels such as natural gas, biogas, and town gas for gas-fired boilers

Characteristics of gaseous fuels such as natural gas, biogas, and town gas for gas-fired boilers include: (1) Good Usability – They readily mix with air during combustion, resulting in minimal flue gas losses and high boiler efficiency. – The fuels contain low levels of sulfur and ash co[…]

11
2024-Jan

What reasons might cause a gas boiler’s burner motor to operate, ignite normally, but then fail and shut down later?

What reasons might cause a gas boiler’s burner motor to operate, ignite normally, but then fail and shut down later? The solenoid valve fails to open due to a damaged solenoid coil or a broken cable, requiring the replacement of the solenoid valve or troubleshooting any circuit disconnection i[…]

10
2024-Jan

During low load operation of a boiler, the reason for using more upper combustion burners is as follows

During low load operation of a boiler, the reason for using more upper combustion burners is as follows In most medium and high-pressure boilers, the superheater relies primarily on convective heat transfer. It is well-known that the steam temperature characteristic of a convective superheater decre[…]

09
2024-Jan

What reasons might cause a gas boiler’s burner motor to run, with voltage applied to terminal 16 of the controller, but without ignition, and subsequently result in a fault shutdown?

What reasons might cause a gas boiler’s burner motor to run, with voltage applied to terminal 16 of the controller, but without ignition, and subsequently result in a fault shutdown? 1. The spark electrode gap is too large; adjustment of the electrode spacing is required. 2. Contamination is p[…]

08
2024-Jan

What factors can cause an overheat condition in a gas boiler’s burner during operation?

What factors can cause an overheat condition in a gas boiler’s burner during operation? 1. High system circulation resistance (due to blockage), verify and check piping valves. 2. Malfunctioning or open circuit of the overheat sensor, confirm the discharge point and adjust or replace the ignit[…]

05
2024-Jan

Characteristics of Palm Oil Fermentation and Slaughtering Tanks

Characteristics of Palm Oil Fermentation and Slaughtering Tanks Palm oil fermentation and slaughtering tanks feature several key advantages: 1. The various components of the palm oil fermentation tank’s body have undergone ANSYS finite element analysis calculations to ensure the safety, reliab[…]

04
2024-Jan

Vacuum Hot Water Boiler Product Advantages

Vacuum Hot Water Boiler Product Advantages 1. Safe and Reliable: The vacuum phase-change boiler operates with a pressure in its fluid circulation system that is below atmospheric pressure, with an internal absolute pressure ranging from 0.02 to 0.08 MPa during operation, which places the unit in a v[…]

03
2024-Jan

Methanol Boiler Product Advantages

Methanol Boiler Product Advantages 1. The boiler tube plates and structural heating surfaces have undergone maximum optimization in their design, featuring an internationally popular three-pass structure. The large volume combustion chamber design ensures a more complete and efficient burn. 2. The f[…]

02
2024-Jan

Gas-fired heating, hot water boilers, and gas steam industrial boilers are types of boilers that utilize natural gas as their primary fuel source

Gas-fired heating, hot water boilers, and gas steam industrial boilers are types of boilers that utilize natural gas as their primary fuel source. Condensing gas boilers, also known as condensing type gas boilers, hinge on the key technology of condensation. They represent a new generation of energy[…]