Home > News
What is the difference between a furnace and a combustion chamber
What is the difference between a furnace and a combustion chamber The angle tube boiler is supported by angle tubes (i.e. large-diameter downcomers) at its four corners, and the drum is horizontally arranged at the top of the boiler front wall. The overall structure is a full membrane wall structure[…]
How to clean the boiler
How to clean the boiler The boiler adopts a suspended full membrane wall lightweight tube laying furnace wall structure, which can expand freely in all directions, is lightweight, and has good insulation performance. The boiler layout is convenient and suitable for various capacities and fuels. Modu[…]
Why do boilers need heat exchangers
Why do boilers need heat exchangers A heat exchanger is a device that transfers a portion of the heat from a hot fluid to a cold fluid, also known as a heat exchanger. Boiler water requires softened water that has undergone desalination and desilication treatment. Due to cost and environmental reaso[…]
What are the hazards of boiler scale
What are the hazards of boiler scale (1) Scale has poor thermal conductivity, leading to overheating and deformation of boiler steel plates due to temperature rise, resulting in boiler damage; (2) Massive waste of fuel and increased operating costs; (3) Resulting in a reduction in the heating area a[…]
What is the reason for boiler water shortage
What is the reason for boiler water shortage The stoker’s negligence; Failure of water level alarm device and automatic water supply regulator; The water level gauge’s steam and water connecting pipes are blocked, and false water levels are formed due to leakage of the plug or other reas[…]
What is the function of a steam pressure vessel
What is the function of a steam pressure vessel Autoclave is a large container equipment used for steam curing of building products such as gray sand bricks, fly ash bricks, aerated concrete blocks, new lightweight wall materials, concrete pipe piles, etc. After steam curing, the products obtain hig[…]
Why is a dosing device used for boiler feedwater
Why is a dosing device used for boiler feedwater To prevent scaling and corrosion, it is necessary to perform internal treatment on the boiler water. After adding chemicals to the boiler water, it can form loose scale with calcium and magnesium ions, which does not adhere to the inner wall of the st[…]
Common ways of boiler renovation
Common ways of boiler renovation 1. Boiler flue gas waste heat recovery The exhaust temperature of industrial boilers is generally high, above 180 ℃, which not only pollutes the environment but also wastes valuable flue gas waste heat resources. By using heat pipe heat exchange technology, this cont[…]
Different treatment methods for boiler water
Different treatment methods for boiler water 1、 Supply water treatment 1. Preprocessing If the source water is surface water, the purpose of pretreatment is to remove suspended solids, colloidal substances, and organic matter from the water. Usually, by adding coagulants (such as aluminum sul[…]