What are the Checks Before Starting a Fuel Burner?
What are the Checks Before Starting a Fuel Burner?
Fuel burners may encounter problems during use, and in order to prevent such problems, what inspections should be performed on the fuel burner before adjustment? The following is answered by Obao Burner.
Fuel burner atomization form and basic operation principle. If selecting alcohol oil as fuel, the alcohol oil burner can choose mechanical atomization burners or substance atomization burners according to the viscosity of the fuel oil. When the fuel is burned in the furnace of the burner radiation room, high-heat gas is generated and used as a carrier to flow into the convection chamber to be discharged through the chimney.
The incoming crude oil to be heated first enters the convection chamber furnace pipe of the burner. The furnace pipe mainly obtains heat energy from the gas passing through the convection chamber through convection. This heat energy is transmitted from the outer surface of the furnace pipe to the inner surface of the furnace pipe through heat transfer and is also transmitted to the flowing crude oil inside the pipe through convection.
Operation of the fuel burner may encounter several problems during the process, which should be properly adjusted. The following will teach you some reasonable methods to adjust the fuel burner. Inspection before adjustment:
Check whether the diesel is in place, whether the fuel pipeline is clean and smooth, whether the valve has been opened, whether there is any pipeline leakage, and whether the pipeline installation is valid.
The detector should be able to regularly check the flame signal, neither too sensitive nor too insensitive. Typically, the reaction time of the flame detector from extinguishment to extinguishment signal should not exceed 0.2 seconds. When the burner is ignited, gas is injected and gas is ignited and burned. Standard ignition operation forms a temperature field before gas flow to promote ignition and combustion.